arc process
英 [ɑːk ˈprəʊses]
美 [ɑːrk ˈprɑːses]
网络 电弧法
双语例句
- Detective and Analytical Systems for the Dynamic Parameters of Arc Welding Process
弧焊过程动态参数的检测和分析系统 - Parameters optimization of arc spray process for aluminum based cored wire;
经研究得到了铝基粉芯丝材电弧喷涂的最佳工艺参数。 - Nonlinear Robust Adaptive Control of Double-Electrode Gas Metal Arc Welding Process
焊丝进给自动弧焊机双电极电弧焊系统的非线性鲁棒自适应控制 - Effect of Molybdenum on Microstructure and Wear Resistance of Iron-based Alloy Coating Clad by Plasma Transferred Arc Process
钼对铁基合金等离子熔覆层组织及耐磨性能的影响 - Nonlinear identification of arc welding process based on support vector machine
基于支持向量机的激光焊接过程的非线性辨识 - Investigation on CN thin film deposited by pulsed cathode arc process
脉冲阴极弧放电制备碳氮薄膜及其分析 - During an automatic arc welding process which visual sensors are used, the electric arc should be controlled to track the weld seam accurately based on the visual sensing information.
在视觉传感的电弧自动焊接过程中，需要根据视觉信息来控制电弧准确地跟踪焊缝。 - Research on electromagnetic compatibility of plasma arc welding process control system
等离子弧焊过程控制系统的电磁兼容性研究 - In order to obtain the model of quasi-keyhole arc weld-ing process, this paper uses the least square method in the identification.
为了得到它的模型，本文采用最小二乘法对其进行辨识。 - Based on analysis for vacuum arc remelting process and according to actual melting condition, some partial strategies which is helpful for control of melting aim were presented, for example, arc length control, melting speed control, decouple control and so on.
摘要通过对真空电弧重熔炉工艺过程的分析，根据冶炼实际情况，提出了一些有助于控制冶炼目标的局部策略，如弧长控制、熔速控制、解耦控制等。 - The fluctuation of current is larger than that of voltage in arc spray process.
实验发现亚稳态电流波动峰具有快速上升、缓慢下降的特点。 - The electric arc steelmaking process may be divided into the following four stages: charging, melting, refining and tapping.
电弧炉炼钢可以分为以下4个阶段：装料，熔化，精炼和出钢。 - Ti-O film was prepared by microwave-electron convolute resonance ( MW-ECR) magnetron filter arc deposition process.
电子回旋加速器共振器采用微波电子回旋共振磁过滤弧设备制备钛氧薄膜。 - Quasi-keyhole arc welding process is a typical nonlinear system.
准小孔弧焊接过程是个典型的非线性系统。 - Computational Modeling of the Solidification During Vacuum Consumable Arc Remelting Process
真空自耗电弧重熔凝固过程的计算机模拟 - As a rule, vessels shall be welded by fusion arc process.
作为规定，容器应用熔接弧焊工艺进行焊接。 - Probing Practice in Smelting Foamed Slag by Submerged Arc Process in EAF
电弧炉泡沫渣埋弧冶炼的实践与探讨 - Co_2 arc process and equipment for hole joint welding of steel radiators
钢制柱型散热器连接孔CO2自动焊设备与工艺的研究 - Properties comparision for self bonding coating by electric arc process
电弧喷涂自结合涂层的性能比较 - A new rotating arc process for narrow gap MAG welding
新型高速旋转电弧窄间隙MAG焊接 - The paper introduces CO_2 arc process and equipment for welding the connecting hole joints of thin steel column radiators.
介绍了钢制柱型散热器连接孔薄板内孔CO2自动焊设备及工艺。 - This paper presents technique of injecting coal oxygen directly to the electric arc furnace in steel refining and summarizes experiences of accelerated melting using a coal oxygen lance in K ES electric arc process and foamed slag formation operation through coal oxygen injection.
本文叙述了电弧炉炼钢直接用煤氧技术，总结了煤气枪助熔技术、K-ES电炉新工艺和喷煤氧造泡沫渣操作工艺。 - If arc process behaves as alternative process of "arc starting-arc blowing out-short-circuiting" with minimum time duration of arc blowing out and maximum frequency of short-circuit transition, the welding process will be stable with less spatter and smooth weld bead.
若电弧过程呈燃弧熄弧短路交替进行，并且熄弧时间最短时，短路过渡频率最高，在这种情况下，飞溅小，焊道成型好，焊接过程稳定。 - Submerged Arc Process with Foaming Slag in a 30t Electric Arc Furnace
30吨电弧炉泡沫渣埋弧操作技术 - Under the condition of constant diameter of welding wire and its feeding speed, the arc process behavor can be changed by adjusting the inductance of welding circuit as well as the voltage of power supply.
在焊丝直径和送丝速度一定的情况下，通过调节焊接回路中的电感量和电源电压，可以改变电弧的过程行为形式。 - Super acids development of ( tial) n Advanced Films by PVD arc process
多弧物理气相沉积技术制备（TiAl）N超硬膜 - The parer evaluates the practicability of CO_2 arc process to weld crane main beam from the analysis of value engineering law.
采用价值工程分析评价了CO2焊焊接起重机主梁的可行性。 - The application of power electronic technique in welding domain resulted in miniaturization and high electronic efficiency of welding inverter, and at the same time, its rapid dynamic response made it a good platform for any arc process control.
逆变技术在焊接电源中的应用使得焊接设备在小型化、高效化的方面有了飞跃性的发展。同时，弧焊逆变电源良好的动特性更为焊接工艺控制提供了一个充分发挥的平台。 - Effect of rare earth and alloy clement additions on the wear resistance of layer is tested by carbon arc process with high chromium alloy cast powder block.
采用碳弧堆焊的方法，在高铬合金铸铁粉块中加入稀土及合金元素，探讨其对堆焊层耐磨性的影响。